|
Post by Dori Ninja on Jun 17, 2007 23:59:36 GMT -6
guess ill transfer this bitch over here too!! lol
and yeah ima be lazy with this!
parts list (i think its complete...) S5 counter weight ATP rims SARD FPR Brake Rotors GP Sports Super Angle Kit Tanabe Sustec Front Under Brace Sumit Fuel Pressure Gauge w/fitting S4 adapter kit w. MAP and IAT ACT Street Light Flywheel Factory Foglights diff mounts Energy Suspension Rear control arm bushings Energy Suspension Front control arm bushings Hawk HP+ Brake Pads Dual Alt. Pulley Additional stock Fuel Pump i/c piping 1600cc secondary injectors Replace motor XS Power I/C core Greddy Profec E01 additional FC ignitor HKS Turbo Timer Apex'I Power FC Garrett T04S Turbo HKS manifold w/ chepo waist gate Rewired Fuel Pump Factory wing S5 Front bumper G-Force 5pt harnesses Grant GT steering wheel Walbro Fuel Pump Carbon Fiber Bucket seat Engine and trans mounts Triangular front Strut brace E-Fan Jegs Radiator GReddy 1.3 bar Radiator cap Custom Intake Toe Eliminator Bushings Rotorsport Racing Plug Wires Braided lines Suspension Techniques Sway bars Pioneer CD player Boost Gauge Electric Fan Custom Exhaust Vert. BBS rims (gold polished lips) Cooling fan thermostat kit Spin Turn knob 15" V6 Mustand Rims
|
|
|
Post by Dori Ninja on Jun 18, 2007 0:01:12 GMT -6
|
|
|
Post by Dori Ninja on Jun 18, 2007 0:01:49 GMT -6
|
|
|
Post by Dori Ninja on Jun 18, 2007 0:03:50 GMT -6
|
|
|
Post by Dori Ninja on Jun 18, 2007 0:06:14 GMT -6
|
|
|
Post by Dori Ninja on Jun 18, 2007 0:06:52 GMT -6
and at a closer look..... still need to figure out where to mount the anchors for the top belts on teh 5pt harness....all three loweres are mounted though!!! e-01 display chillin in the corner the seat again and i also got the engine bay painted up a bit too!! not done yet though casue i ran out of paint lol but it looks like its gunna rain in a min here so ill wait till tom to finish her up!
|
|
|
Post by Dori Ninja on Jun 18, 2007 0:07:33 GMT -6
|
|
|
Post by thechimichunga on Jun 18, 2007 15:12:49 GMT -6
the upper harness straps should be mounted to the rear strut tower bar. Or you could weld in a harness bar, but the strut tower bar would be killing two birds with one stone.
|
|
|
Post by jproduce on Jun 18, 2007 18:52:15 GMT -6
Harness bars protect better for roll overs, you can mount them in the rear bolt holes for the backseats etc. The B pilar and strut mounts are not a good spot as they are under enough stress without having to hold a moving body in place. Takata I think it was, had a good diagram about harness mounting if you can translate enough to understand. I would wait and do a harness bar in a cage, or get a weld in floor bar.
|
|
|
Post by Dori Ninja on Jun 19, 2007 17:11:21 GMT -6
i will be doing something with the harnesses eventualy, this is just temp till i decide if im getting a cage or not
|
|
|
Post by Dori Ninja on Jun 19, 2007 17:12:24 GMT -6
o., and also, the flywheel, harness adapter, iat, map and a couple other things are on there way!! should have her runnin by next month latest!!!!!
|
|
|
Post by Silvia Surfer on Jun 19, 2007 22:27:35 GMT -6
sweetness.
|
|
|
Post by sukai on Jun 20, 2007 22:44:18 GMT -6
Thats right. That is one bitchen sexy car right there! Keep us posted. I love all the pictures. Better description than any words could ever say. How are those turbos workin out? I don't know if that little sensor got lost on my side or yours but I feel really bad about that. Hope its not a really expensive part (I don't think it would be)
|
|
|
Post by Dori Ninja on Jun 21, 2007 12:33:51 GMT -6
havent gotten to the turbos yet lol gunna check out the T04s first cause i gotta do some custom shit to get the twins to fit in the engine bay from what i understand, but dont worry about the sensor i just ordered the kit from banzai which had the iat map and harness adapter all together!!! and yeah, so far im thinkin what u see for paint now is what itll stay, just redone professionaly!! lol also added will be a lip (feed style) and some side skirts, and maybe a rear lip!!! then some nice 16's, maybe some Stock Sk2 16's and a set of MK4 17's for sure.....might get some 18's for when im cruisin/show stoppin, but not sure yet....
|
|
|
Post by Dori Ninja on Jul 9, 2007 13:22:33 GMT -6
well, the flywheel is off now....have the battle wounds to prove it too!!! lol also sent the ECU out for its base tune and is now back and back in its spot with the harness adapter and harness installed!!! just gotta finish hookin up the engimen and get a battery for it and take it over to my buddies for the piping to be thrown together and ill be able to start it!!! whoot whoot!!! lol also still need to throw the trans on and have some things to address with my steering as the steering angle spacers wont be goin on yet but hey, ill get that figured out and have it all together soon!!! ill have some pics up soon! but tomorrow i should be able to run and get everything i need except the batt.....ill have to wait on that but she's comming together and its getting exciting cause i should be able to drive it by the end of the month!!! whoot whoot!! also, i found myself a datalogit for 320 online.....im poor but silvia surfer was looking to go halvesies on a super commander before hopefully hell be interested in the Datalogit instead casue the closest place i can find to tune this bad boy wants upwards of $600 (A-spec) and i have also heard some not so good reviews from them as well so id rather not!! lol
|
|