|
Post by Dori Ninja on Mar 18, 2008 22:12:34 GMT -6
hahahahahaha funny story....so i thought that i would be able to have my car running and be able to drift this year, but wow yeah i forgot, NOTHING fucking goes my way!!! the fucking motor is JUNK!!!!!!!!!!!!!! tried filling it up with water so it had something in the cooloing system so i can atempt an around the block trip and see how she drives with the shit ass tune and i heard water leaking on the ground.....ok forgot to plug something...WRONG!!!!!! grab the drop light and what do i see??? water leaking out of the seal between the front rotor and the front plate!!!! and on top of that its all oily so its more than just that gasket which i could fix pretty easily....wouldnt even have to remove the engine.....but nope with it all oily its more than just that! hahahaha wow, i should just sell everything and never touch a car again cause nothing can ever fucking work out! soo fucking close but HA FUCK U CHUCK U ARE A BITCH ASS FAGOT WITH NOTHING AND ALWAYS WILL BE!!!!!!
[/vent]
|
|
az86
Nah, thats Clutch you smell
Posts: 152
|
Post by az86 on Mar 18, 2008 23:38:16 GMT -6
dont give up hope man. my car broke again too. i feel your pain.
|
|
|
Post by Dori Ninja on Mar 19, 2008 1:23:38 GMT -6
idk, its hard with the recent events in my life to not give up hope, i really feel right now that i am destined for the worst life possible, like 40 years old still livin in my moms house and shit
|
|
|
Post by Silvia Surfer on Mar 19, 2008 2:50:06 GMT -6
whos chuck? is that chuck norris? lol. youll be ok. u dont have any kids and your healthy. its just a setback dude. go hit the heavy bag for an hour.
|
|
|
Post by Saki Steve on Mar 19, 2008 8:14:29 GMT -6
Once ths shop is up....... I might be willing to do some rebuilding......
|
|
|
Post by Dori Ninja on Mar 19, 2008 13:58:48 GMT -6
just pushed the car out of the gay-rage and looked it over, there is oil in teh water, probably gas too, checked the oil and its all runny and smells like gas, the oil feed started spraying out water as well so its officially fucked and getting preped to be pulled and dis-assembled!!!! then as soon as i get some dough it will be rebuilt and ported!!!
|
|
|
Post by Dori Ninja on Mar 21, 2008 18:32:21 GMT -6
MINE!!!! and yeah i know they do me no good if the car isnt running but hes in mad town and there only 150 so i get them next fri!!! whoot whoot!
ill prolly paint them up black or something and throw some spacers be hind them and rock out with my cock out!!!!
|
|
|
Post by smrotary on Mar 24, 2008 2:16:04 GMT -6
Pretty!
|
|
|
Post by Dori Ninja on May 5, 2008 12:26:41 GMT -6
wow rotary ftmfw!!!!!!!! took be an hour to tear her down today, id say about 1:15-1:30 time total on tearin her down!!! thats nuts cause i actually took my time and followed the FSM on every little part, plus had to figure out a few improvisions due to the fact that i dont own a mazda dealership, nor do i have factory support so i dont have any specialty tools!! i new it was a simpler set up and everything but damn!!!! i could do a rebuild in a day and still take an hour nap at lunch and then some!!! hahahaha
but yeah, just really postin to say that i am progressing slowly but surely......just waiting on fundage now!!!
on a side note, everything in the motor looks great!!! some of the rubber seals/gaskets are fuxord and the cooling pockets and what not are filled with some sludge but as far as the rotors and insides of the housings it looks stupendous!!!! now just gotta send tha irons out to banzai for a street port and order my rebuild kit!!! whoot whoot!!
but i was warnded that atkins just sells paper gaskets and they suck ass and to go else where....any input on that from my fellow rotary heads?? i was thinking of ordering the Mazda OEM gasket kit and then hittin up atkins for the rest...guy said he went that route and spent only about a grand....idk what ima all get though cause everything looks so damn good aside from the seals!!! lol ill prolly still get the apex seals and corner seals and springs since its apart an all...but yeah, for once in a long timefeelin good about this thing again! HAHAHAHAHAAHA
[/novel] lol
|
|
|
Post by smrotary on May 5, 2008 12:35:58 GMT -6
Atkins can fab you a kit with the gaskets you want. As far as your seals (apex and side w/springs) and coolant seals go get Mazda factory parts. I use Atkins gaskets for about everything else on my car. They are not made out of paper lol but I would really urge you to ask them to fab you a kit using Mazda parts for the apex seals, side seals, springs and coolant seals. They do it all the time.
Have fun! tell us how it goes!
|
|
|
Post by Dori Ninja on Aug 12, 2008 15:13:49 GMT -6
o snap!!! down payment made to banzai has been made!!! motor is getting sent out for rebuild S5 hybridation, and a street port!!!! whoot whoot!!! also havin it painted black and blue lol so now i just gotta figure out the body color
speaking of which, the body work should be getting done soon too!!
Whoot WHOOT!!!!!!!!!!!!
|
|
|
Post by Silvia Surfer on Aug 12, 2008 16:16:57 GMT -6
arent you going away though?
|
|
|
Post by Dori Ninja on Aug 12, 2008 20:36:04 GMT -6
no not anymore.....red tape and army inefficiency and lack of prioritizing i am no longer able to go, at least not for another year...
|
|
|
Post by smrotary on Aug 13, 2008 0:32:24 GMT -6
o snap!!! down payment made to banzai has been made!!! motor is getting sent out for rebuild S5 hybridation, and a street port!!!! whoot whoot!!! also havin it painted black and blue lol so now i just gotta figure out the body color speaking of which, the body work should be getting done soon too!! Whoot WHOOT!!!!!!!!!!!! Whoot whoot is right! Congrats!
|
|
|
Post by Silvia Surfer on Aug 15, 2008 0:57:50 GMT -6
so. will it run after this broham?
|
|