|
|
Post by 034drsupra on Feb 14, 2009 13:44:02 GMT -6
I got a deal a couple of months ago on a Brand New 2JZGTE motor with a 30k IS300 Head it, Beyond Redline in Green Bay built the motor with ARP headstuds and main studs. The engine came with a custom Quartermaster Clutch, 6000 mile V160 Trans with IS300 Trans Mounts, GS400 Rear diff, AEM, intercooler piping, and Down Pipe , i had to take a second loan out on my car, but i got all the really expensive stuff done first. The guy i bought it from put 15k+ into it. All I had to get was fuel and turbo, I got a GT35R turbo, 750cc RC injectors. I took my time buying all the extra parts to finish it. Next weekend we are using my friends transmission shop to install it. This is what i got, will update when i work on it. Pic of Car its going into  WRX Gauge Pod with AEM B/C, Innovative Wideband, and Cobalt Oil Press Gauge  Fuel Pump  Tial 44mm Waste Gate  AEM with PNP Harness      V160  GS400 Rear Suspension/diff       |
|
|
|
Post by Saki Steve on Feb 14, 2009 14:11:51 GMT -6
Nice Looking ride. Hotness, I been looking to pick one of these of when i can afford it..... I got way to much on my plate to get one yet. Looks Good Tho!
|
|
|
|
Post by Silvia Surfer on Feb 14, 2009 18:36:03 GMT -6
oooooo............ sweet tits.
|
|
|
|
Post by sil on Feb 15, 2009 2:18:39 GMT -6
Looks nice, that a twinplate clutch?
|
|
|
|
Post by 034drsupra on Feb 15, 2009 11:08:35 GMT -6
|
|
|
|
Post by Dori Ninja on Feb 16, 2009 12:47:56 GMT -6
Beyond Redline in Green Bay built the motor now lets watch it go BOOM!!!! |
|
|
|
Post by 034drsupra on Feb 16, 2009 13:33:56 GMT -6
I would cry! lol The short block was from toyota, all they had to do was put arp head studs to bolt the head on, and put new arp main studs in, its pretty its hard fuck that up. I have to take it there to get tuned tho, we'll watch it go boom from the safty of the viewing area.
|
|
|
|
Post by Saki Steve on Feb 16, 2009 19:52:53 GMT -6
you better hope so!
|
|
|
|
Post by Dori Ninja on Feb 18, 2009 23:18:05 GMT -6
I would cry! lol The short block was from toyota, all they had to do was put arp head studs to bolt the head on, and put new arp main studs in, its pretty its hard fuck that up. I have to take it there to get tuned tho, we'll watch it go boom from the safty of the viewing area. but then again not that hard...i bet they just torqued them...its much more accurate when u torque than take the angle gauge and turn them more...its a diff torque spec then streight torqueing them...but thats how i was taught at tc and pretty sure thats more accurate...but hopefully they had louis do the work for u, i know he is good shit!!! and i would highly advise finding another place to tune.....i would not trust them AT ALL!!! shit i dont lol but hey, ur car ur dough...never delt with them personally...cause i know who they are hahahaha....but shit, just be carefull!! |
|
|
|
Post by 034drsupra on Feb 19, 2009 13:12:53 GMT -6
Where do you suggest i go? I just need a Dyno, my buddys whos helping me build this knows how to tune.
|
|
|
|
Post by Dori Ninja on Feb 19, 2009 15:24:17 GMT -6
not sure, i am still trying to figure that out for my car...was gunna haul it to IN to the shop that buit my car...but some buddies were talking and a shop in ST. louis has a good rep...idk though cause im lookin for rotary shops, i no SP in chicago area are BALLER with the 2JZ's a couple buddies of mine really promote them...idk go on www.wistreetscene.com and ask around (and when u join tell them im ur referal, same screen name  ) theres some dec knowlage of local shops there, but dont tell them u got ur shit was assembled at beyond redline or there might be a slight hazing lol |
|
|
|
Post by Dori Ninja on Feb 19, 2009 15:25:51 GMT -6
o, and i was too distracted by u going to beyond gayline to tell u that this is a pretty nice build and hope everything gets together soon (and right) and id love to see it on the streets!!! ive always like is's hopefully my buddy will be getting one so i get a chance to play with it!!!! both behind the wheel and under the hood |
|
|
|
Post by 034drsupra on Feb 19, 2009 16:14:52 GMT -6
Thanks, i would never take my own personal stuff there, (only to use the Dyno) the guy i bought the whole setup got it built there. He had had of $$ I used to be on the system7carshow forums, and that wistreetscene, but i could never find a link back get to it. (They really need to make it searched by google) So thanks for that link, ive been looking for that forum for a while.
|
|
|
|
Post by 034drsupra on Feb 19, 2009 16:33:33 GMT -6
wistreetscene: almost 2 years to the day lol
Last visit was: Fri Feb 09, 2007 3:52 pm
It is currently Thu Feb 19, 2009 4:29 pm
|
|
|
|
Post by Dori Ninja on Feb 19, 2009 16:36:24 GMT -6
well shit, them post up!!! lol and yeah, they let the forums slide but roy is really pumpin it up big time latley and updated a gang of shit!!! lots more activity these days |
|
) theres some dec knowlage of local shops there, but dont tell them u got ur shit was assembled at beyond redline or there might be a slight hazing lol